Zelmer 36Z011, User Manual

Page: 37 / 40

37
GW36-004_v01
OVERHEATING PROTECTION
The dryer is equipped with double thermostatic protection against overheating:
1.
Cut-out – operation in automatic cycle, it means, when temperature grows extensively, the
heater is switched off and the dryer operates as a fan, after cooling down the heater is on again.
2. Temperature limiter holding mains supply – prevents the appliance overheating during
operation in non-typical conditions, i.e. blocked engine.
After the limiter goes, in order to start up the dryer again:
remove the plug from the mains supply outlet, –
leave the appliance to cool down, –
insert the plug into the mains supply outlet, –
switch the dryer on again. –
CLEANING AND MAINTENANCE
Clean the sieves and lid in lukewarm water with usual washing up liquids. –
Clean the base - „Heat-and ventilation unit” with damp cloth and dry carefully. –
ECOLOGY – ENVIRONMENT PROTECTION
Each user can protect the natural environment. It is neither difficult nor expensive.
In order to do it: put the cardboard packing into recycling paper container; put the
polyethylene (PE) bags into container for plastic.
When worn out, dispose the appliance to particular disposal centre, because of
the dangerous elements of this appliance, which can be hazardous for natural
environment.
Do not dispose into the domestic waste disposal!!!
The manufacturer/importer does not accept any liability for any damages resulting from unintended use or improper
handling.
The manufacturer/importer reserves his rights to modify the product any time in order to adjust it to law regulations,
norms, directives, or due to construction, trade, aesthetic or other reasons, without notifying in advance.