Zelmer 33Z033, User Manual

Page: 45 / 48

45
GW33-040_v01
How to use
Attaching accessories
In order to attach the accessory to the brush fix it to the air outlet and press. In order to detach the accessory, press the release button (2) and remove
the accessory from the brush. Always switch off the appliance before changing accessories.
Operation
Plug in the appliance. The curling brush has three airflow speed and temperature modes (4) :
0 Off mode.
1 Low speed and low temperature mode.
2 High speed and high temperature mode.
High speed and low temperature mode.
To start styling set the switch (4) in the desired position.
Using attachments
1. Concentrator
Use the concentrator while using the curling brush for drying hair. Thanks to this attachment the airflow is concentrated and the hair is dried faster. We
recommend to start drying hair using the second airflow speed and temperature mode and after a while to change the mode into the first one. To set
your hairstyle switch to cold shot (4) , sliding the button to the uppermost position.
2. Styling brush
The styling brush is used to smooth hair or style it in waves. The brush adds volume at the roots of the hair. If you want to curl your hair, wrap a strand of
hair around the brush. Set the button (4) to the "1" or "2" position. Dry hair. Then you can change the setting to cold shot in order to set your hairstyle.
3. Round brush with retractable bristles.
The round brush with retractable bristles is used to style curls. Turn the ring in the upper part of the attachment clockwise to extend the bristles. To
retract the bristles, turn the ring anticlockwise. If you want to curl your hair, wrap a strand of hair around the brush. Switch on the appliance by setting
the button to the "1" or "2" position. Dry hair. Then you can change the setting to cold shot in order to set your hairstyle.
Cleaning and maintenance
The curling brush is intended for household use only. –
Always switch off the curling brush by sliding the button – (4) to the 0 position and unplug the appliance.
The housing can be wiped with a damp cloth, however it needs to be wiped dry afterwards. –
Do not use abrasive detergents such as emulsions, cream cleaners, polishes, etc. to clean the external elements. They may remove the graphic –
information symbols such as: scales, marks, warning signs etc.