Zelmer 28Z025, User Manual

Page: 66 / 72

66 GW28-022_v01
Set the temperature – (5 level)
or higher with or
buttons, as described in “Temperature
Setting” item. The steam ironing indica -
tor (B) .
Move the – Steam Control Knob (4) , in or-
der to set the amount of steam.
After operation switch off the steam mov- –
ing the Steam Control Knob (4) to position.
After operation press and hold – button for about 2 sec-
onds to switch off the iron. You can hear single sound signal. Then the
display (5) goes off.
Disconnect the iron from mains supply outlet. –
When the iron gets cool completely, store it vertically in a safe place. –
REMARK: For steam ironing the temperature setting 5 to 9 is recom -
mended.
Burst of steam
– Always follow the garment manufacturer’s
ironing instructions mentioned at the garment label.
This function provides extra amount of steam to remove stubborn wrinkles
at clothes and hanging garments.
Fill the water tank in as described under “ – How To Fill Water ”.
Connect the iron to a suitable mains supply outlet. –
The – display (5) glows for a moment and you can hear single sound sig-
nal. Then the display (5) go off.
Set the temperature – (5 level) or higher with
or buttons, as described in “ Tempera -
ture Setting ” item.
The – steam ironing indicator (B) appears
on display.
The appliance is ready for operation. –
Press the – Burst of Steam Button (3) once
– steam will shoot from the holes of the sole-
plate.
Spraying
This function can be used any –
time and is not affect any set-
ting.
Fill the water tank as de- –
scribed in “How to Fill Wa -
ter” .
Aim the – nozzle (9) to the gar-
ment.
Press the – spray button (2) .
It may be necessary to press the spray button a few times to start this
function.
Dry ironing
– Always follow the garment manufacturer’s ironing
instructions mentioned at the garment label.
Connect the iron to a suitable mains supply outlet. –
The – display (5) glows for a moment and you can hear single sound sig-
nal. Then the display (5) go off.
Set the temperature according to the requirement on the label of the –
garment using or buttons, as described in “ Tem -
perature Setting ” item.
When the temperature is reached the number stops blinking and you –
can hear a single sound signal, the iron is ready to use.
After operation press and hold
– button for about 2 sec-
onds to switch off the iron. You can hear single sound signal. Then the
display (5) goes off.
Disconnect the iron from mains supply outlet. –
When the iron gets cool completely, store it vertically in a safe place. –
Steam ironing
– Always follow the garment manufacturer’s
ironing instructions mentioned at the garment label.
Fill the water tank in as described under “ – How To Fill Water ”.
Connect the iron to a suitable mains supply outlet. –
The – display (5) glows for a moment and you can hear single sound sig-
nal. Then the display (5) go off.