Zelmer 26Z012, User Manual

Page: 36 / 40

36 GW26-005_v02
Assembling and disassembling of heating plates
Removing heating plates
Remove the lower heating plate holding the handles from both sides
–
and pressing the releasing button (6) .
Remove the upper heating plate holding the handles from both sides
–
and pressing the releasing button (6) .
Inserting heating plates
Insert two protrusions of the plate into the grooves in the rare part
–
of the base or the cover, and then press the plate towards the base,
until it clicks. Make sure the heating plates are properly assembled.
Handling and operation
Before first usage:
remove form the package,
–
check if the voltage on the nameplate corresponds with the voltage of the mains,
–
clean the appliance wiping the outer and inner surface with a damp cloth or paper towel; wash the
–
plates in water with a gentle detergent (see
“Cleaning and maintenance”
),
assemble the dried plates in the appliance,
–
switch it on for approximately 15 minutes in order to remove all remains from manufacturing process.
–
Switch off the toaster then, and let it cool down completely and wash the plates again.
For further usage:
place the toaster on dry, flat surface near the mains supply outlet,
–
when you toast first time on given day, cover carefully all the surface of both plates with vegetable oil or
–
melted roasting fat using the brush for dough, before you start, then heat the appliance,
insert the plug into the mains supply outlet (both pilot lights –red and green – shall glow),
–
wait until the green light is off (it lasts about 3–5 minutes), which means that heating plates reached the
–
toasting temperature,
since then the green light shall go on and off – which means that the toaster keeps the desired toasting
–
temperature.
Preparing the sandwiches (heating plates for sandwiches)
open the toaster,
–
put the slice of toast bread, app. 1 cm trick with its buttered side to the lower plate,
–
put other ingredients on the slice,
–
cover the ingredients with the second slice of bread with buttered side to the top, and close the toaster
–
carefully.
In case it is difficult to close the toaster, remove the exceeding ingredients. The toaster can not be
closed by force, as it can result in damage.
open the toaster after some minutes (the toasting time depends on the recipe you apply to prepare the
–
products and on the user’s likes) and carefully remove the toasted sandwich.
Preparation of wafers (heating plates for wafers)
when you toast first time on given day, cover carefully all the surface of both plates with vegetable oil or
–
melted roasting fat using the brush for dough, before you start, then heat the appliance,
pour the dough on exactly on the centre of the wafer plate, so that it covers the lower plate and
–
distribute it evenly on whole surface,
close the cover, but
–
do not lock the hook (closing the hook does not allow the wafers grow),
bake the wafers about 7–10 minutes, do not open the toaster during first minute of baking,
–
when the wafers are ready, remove them carefully, not to touch the heating surface with a sharp,
–
pointed or metal object.
Preparation of grill (heating plates for grilling)
cover carefully all the surface of both plates with vegetable oil or melted roasting fat using the brush for
–
dough, before you start, then heat the appliance,
put the products on the lower heating plate and close the cover.
–
The toaster can not be closed by
force, as it can result in damage.
after some minutes (the toasting time depends on the recipe you apply to prepare the products and on
–
the user’s likes) open the toaster and remove the grilled products carefully.