12
UNIX 5100 Full Face Mask
Instructions for Use
RE 2568-789-05795731-2016
These Instructions for Use serve to explain the design, principle of operation,
and the use of UNIX 5100 Full Face Mask (hereinafter referred to as the Mask).
Read this manual carefully and follow the rules of operation.
1 Intended Use of the Mask
1.1 The Mask is used as a facial part in personal respiratory protective equipment
(RPE) to reduce the risk of exposure of harmful factors to a human.
The Mask serves to supply cleaned air to human respiratory system and at the
same time to protect the person’s face and eyes against contact with hazardous
substances.
1.2 The Mask can be used in all climatic zones at temperatures ranging from
40 °С below zero to 40 °С above zero.
1.3 In terms of intended use and protective efficiency, the Mask meets
EN 136:1998+AC:2003 СL2 requirements.
ATTENTION
!
1.4 The multiplicity of reducing the concentration of gases, vapors and aerosols
with filters is 2000.
1.5 It is prohibited to use the mask in conditions of possible lack of oxygen (less
than 17 % by volume) in the air (for example, in tanks, cisterns, wells, etc. isolated
rooms of this type), with unknown composition and concentrations of harmful
substances, as well as for protection against low-boiling poorly absorbed organic
substances (methane, ethane, butane, ethylene, acetylene, etc.)
1.6 It is prohibited to use defective masks.
1.7 It is prohibited to disassemble and assemble of the Mask on one’s own.
1.8 It is prohibited to put on and put off the Mask in explosive atmosphere.
1.9 It is prohibited to use the mask by people with whiskers, bristles, a beard,
hairstyle preventing the mask from being snugly fit to face, what can lead to the
ingress of harmful substances under the mask along the obturation line (aside
from the filter).
1.10 It is prohibited to store masks during operation near the heating system
and heating devices.
1.11 After storage at air temperature below 0 °C, the masks shall be kept for
24 hours at air temperature (20 ± 5) °С before using for the intended purpose.
2 Technical Specifications of the Mask
2.1 The mask complies with essential health and safety requirements set in
Annex II of Regulation EU 2016/425.
