manualshive.com logo in svg

Zektor CVS4, User Manual, Page: 15 / 32

Share
Download
Zektor CVS4 User Manual Download Page 15

13

CVS4 Component Video Switch

Where:

 

in = Currently selected channel.

Note 1: If the CVS4 is off, this command will turn on power before selecting channel.
Note 2: For backward compatibility with the HDS4.2, there is no space after the command in the 

response string.
Note 3: For backward compatibility with the HDS4.2, this response string is sent in the Asyn-

chronous mode when a channel status has changed. Future products will return the “

Output 

Mapping

” Query Response string.

Front Panel Lighting Mode

Set the behavior mode of the front panel LEDs.

LM 0       

Turn off front panel lights. 

LM 1       

Set the front panel lights to always DIM.

LM 2       

Set the front panel lights to always BRIGHT.

LM 3       

Set the front panel lights to AUTODIM after 4 seconds.

LM ?

   

 

 

Query for current setting.

LM 

 

 

 

 

Query for current setting.

Response String:

=LM 

m

Where:

 

m = Current Lamp Mode setting

Front Panel Lighting Mode (HDS4.2 Version)

Note: This command exists for backwards compatibility with the HDS4.2, use the “

LM

” version of 

this command in new designs.
Set the behavior mode of the front panel LEDs.

L 0       

Set the front panel lights to be always DIM.

L 1       

Set the front panel lights to be always BRIGHT.

L 2       

Set the front panel lights to AUTODIM after 4 seconds.

L 3       

Turn off front panel lights.

L ?

 

 

 

 

Query for current setting.

L  

 

 

 

 

Query for current setting.

CVS4 Command Reference 

(Cont’d)

Summary of Contents for CVS4

































Reviews:

No comments