Zeizz Primo Star, Operating Manual, Page: 17 / 306

Primo Star / Primo Star iLED Start-Up and Operation Carl Zeiss
M60-2-0011 v 08/2008
17
En
g
lish
•
Loosen the set screw (Fig. 9/ 6 ) on the back of
the device, unplug the connector (Fig. 9/ 2 ) of
the plug-in power unit (Fig. 9/ 5 ) and insert it
into the connection socket (Fig. 9/ 1 ) of the
reflected-light illuminator.
•
Plug the connector (Fig. 9/ 3 ) of the reflected-
light illuminator into the connection socket
(Fig. 9/
4 ) at the stand and tighten the set screw
(Fig. 9/ 6 ).
•
Fasten the cable of the reflected-light
illuminator by pushing it into the cable clip
(Fig. 9/
7 ).
•
Insert the plug-in power unit into a power
outlet.
Mounting the slider with yellow filter to the
luminous-field diaphragm
•
Unscrew the cover cap (Fig. 11/ 2 ) from the
luminous-field diaphragm (Fig. 11/ 3 ).
•
Turn the slider (Fig. 10/ 3 ) upside down. Loosen
the clamping screw (Fig. 10/ 4 ) of the supporting
ring and remove the supporting ring (Fig. 10/ 1 )
upward.
•
Put the cover cap (Fig. 10/
2 ), with its upper side
facing downward, into the slider (Fig. 10/ 3 ).
•
Insert the supporting ring (Fig. 10/ 1 ) into the
slider and fix it with the clamping screw
(Fig. 10/ 4 ).
Fig. 9 Connecting the power supply unit
Fig. 10 Inserting the cover cap into the
slider