Stativo M LED
UTILIZZO
ZEISS
06/2016
435425-7144-008
5
It
alia
no
4
UTILIZZO
4.1
Utilizzare lo stativo M LED con il
modulo di illuminazione con luce
trasmessa su campo chiaro
•
Accendere l'illuminazione con luce trasmessa
premendo sulla manopola inferiore
(Figura 4/
2
) e ruotarla per regolare l'intensità
della luce.
•
Spostare la leva (Figura 4/
3
) per commutare
tra campo chiaro (BF) e illuminazione su tutti i
lati su campo scuro (DF).
Premendo/ruotando la manopola
superiore dell'illuminazione
(Figura 4/
1
) si può aggiungere luce
diretta variabile alla luce trasmessa
impostata.
Per informazioni più dettagliate
sull'utilizzo dell'illuminazione con luce
diretta si rimanda alle istruzioni per
l’uso Stemi 305/508.
4.2
Utilizzare lo stativo M LED con
l'unità di illuminazione con luce
trasmessa
•
Accendere l'illuminazione con luce trasmessa
premendo sulla manopola inferiore
(Figura 5/
2
) e ruotarla per regolare l'intensità
della luce.
•
Per impostare l'illuminazione con luce
trasmessa su campo chiaro, spingere la
manopola/pulsante (Figura 5/
3
) verso la
posizione posteriore (BF). Quindi ruotare la
manopola per cambiare l'angolo di
inclinazione dello specchio girevole fino a
quando l'oggetto non viene illuminato dal
basso.
Lo specchio girevole ha un lato
trasparente e uno opacizzato: girare lo
specchio trasparente per ottenere un
campo chiaro ricco di contrasto, usare
lo specchio a riflessione diffusa per
ottenere un campo chiaro omogeneo.
•
Per impostare l'illuminazione laterale con luce
trasmessa su campo scuro, spingere il
pulsante (Figura 5/
3
) verso la posizione
anteriore (DF).
Figura 4 Utilizzo del modulo di illuminazione
con luce trasmessa
Figura 5 Utilizzo dell'illuminazione con luce
trasmessa