3 Referencing Tasks | 3.9 3D Referencing
ZEISS
2. In the left panel uncheck all pre-selected Referencing tasks and activate only the
3D Refer-
encing
task.
3. Click on
Start referencing
.
à
Then this window opens up:
4. Follow the instructions given in that window: - Straighten the stand (Make sure it sits in the
mechanical upright position). - Insert the 1.6x objective lens. - Remove any objects from the
sample stage.
5. Click
START
to start the 3D referencing procedure. This process takes about 30 minutes.
(Here we record and process a large number of data that are required for a correct display
and processing of 3D data).
Notice: Do not turn off the system and avoid vibrations!
Quick Guide ZEISS Smartzoom 5 | en-US | Rev.1
24
Summary of Contents for Smartzoom 5
Page 1: ...Quick Guide ZEISS Smartzoom 5 Referencing Application...
Page 33: ......