ZEISS
Start-Up and Operation
Primovert
20
415510-7244-001
12/2014
3.1.9
Transmitted-Light Illuminator: Inserting the LED
The microscope is delivered with the transmitted-light illuminator with halogen bulb 6 V 30 W/LED 3 W
already mounted.
If the transmitted-light illuminator with LED (halogen bulb) is to be additionally employed, it must be
inserted into the stand instead of the transmitted-light illuminator with halogen bulb (LED)
(see Section 3.9.1).
3.1.10
Connecting the Stand with
Binocular Tube or Phototube to the
Power Supply System
•
If necessary, replace the power supply adapter
attached to the plug-in power unit (Fig. 10/
1
)
by one of the country-specific adapters supplied
(Fig. 10/
3
), pulling off the existing adapter and
inserting the desired one.
•
Insert the plug (Fig. 10/
4
) of the plug-in power
unit into the connection socket located on the
rear of the stand (Fig. 10/
5
).
•
Connect the plug-in power unit (Fig. 10/
1
) with
a power outlet.
•
If the plug-in power unit cannot be plugged
into the chosen power outlet because of limited
space, replace the power outlet adapter by the
supplied IEC adapter (Fig. 10/
2
). This allows the
plug-in power unit to be put flat onto the
tabletop and connected to the power outlet
through a country-specific appliance cable.
Fig. 10
Connecting the plug-in power unit
