12
You return to live image mode by (repeated) pressing on the MENU button.
Make sure that the remote control is always pointed in the direction of the IR receiver
(Fig. 1/18) on the PhotoScope. Otherwise the remote control cannot transfer signals to
the PhotoScope.
Picture
For fast and simple photography, select the program using the SCROLL buttons
(Fig. 2/2) in the menu .
Now align the PhotoScope on the desired
object and carefully focus the image using
the focusing (Fig. 1/2) on the spotting scope.
Use the zoom ring (Fig. 1/3) to change the
image window. You will see a live preview of
the image on the screen at the same time.
Light coming through the eyepiece can lead
to undesirable reflections on the image.
In this situation place the cap on the eye-
piece.
Press the CAPTURE button (Fig. 2/3) on the remote control to take a picture.
The camera default settings ensure good picture quality in most conditions.
However, it is recommended that you also read through the detailed instructions for use
on the enclosed CD-ROM, so that you can set the available options in the individual
menus.
Playback
Press the PLAYBACK button (Fig. 2/6) to display the picture taken on the monitor. With the
SCROLL buttons (Fig. 2/2) you can page back and forth through several saved pictures.
The ZOOM PLUS (Fig. 2/5) and ZOOM MINUS buttons (Fig. 2/4) are used for zooming in
and out. Return to the live image mode by pressing the PLAYBACK button (Fig. 2/6)
again.
1
AUTO
1
11
2
10
3
4
5
6
7
8
9
Fig. 2