Carl Zeiss
Copyright / Trademarks
MCU 2008
2
M60-2-0019 e 05/2012
Prior knowledge of this manual is essential for proper operation of the instrument. You are therefore
advised to familiarize yourself with its contents and, equally importantly, to follow special notes and
instructions it contains regarding the safe product handling.
We reserve the right to make changes as may be deemed appropriate in the interest of ongoing technical
improvement. This manual is not subject to updating or revision services of any kind.
©
This document must not be forwarded to anyone, nor may its contents be duplicated, exploited
or disseminated in any other way, unless express approval to do so has been procured. Failure to
comply will create a liability for compensation of damages.
All rights are reserved in the event of a patent grant or registration of an industrial design.
Any company or product name which is mentioned in this operating manual can be a trademark or a
registered trademark. References to products of other manufacturers are provided for information only.
They are not intended to express an approval or recommendation for use of such products.
Carl Zeiss Microscopy GmbH will not assume any liability as to the performance or the use of this type of
products.
Issued by:
Carl Zeiss Microscopy GmbH
Carl-Zeiss-Promenade 10
07745 Jena, Germany
[email protected]
www.zeiss.com/microscopy
Carl Zeiss Microscopy GmbH
Königsallee 9-21
37081 Göttingen, Germany
Operating manual no.: M60-2-0019 e
Date of issue: Version 7 – 01.05.201
Summary of Contents for MCU 2008
Page 1: ...Operating Manual MCU 2008 Two Axis Stage Controller...
Page 18: ......
