Zeiss KSK 150 FC, Instructions For Use Manual

Page: 10 / 92

Safety Measures KSK 150 FC
Version 7.1
Page 10 G-30-1158-en
• Do not use power-operated devices included in the delivery package
– in explosive atmospheres,
– at a distance of less than 25 cm from flammable anesthetics or volatile
solvents such as alcohol, benzine or similar substances.
• Do not use or store the system in damp rooms. Do not expose the system
to water splashes, dripping water or sprayed water.
• Ensure that fluids cannot penetrate into the device.
• Never directly look with binocular tube, object lens or an eyepiece into the
sun.
A potential equalization connection can be found on the underside of the car-
rier arm (see IEC 60601-1:2005 + A1:2012). This makes it possible to connect
other active devices to the same earth potential or it can be used for the re-
dundant connection with the grounding conductor.
• Always switch off the system before connecting it to / disconnecting it
from line power, for cleaning its surface or if it will not be used for a pro-
longed period of time.
• Please note the information on electromagnetic compatibility (EMC) in the
chapter on "System data" and the section on "EMC - electromagnetic
compatibility".
• The maximum brightness of the lamp(s) can drop over time (normal device
attribute).
• Transport the device over long distances (e.g. relocation, return for repair)
only in its original packaging or special return packaging. Please contact
your dealer or Carl Zeiss Service.
• Pay attention to the places on the device identified by the information la-
bel "Risk of crushing". In these places there a risk of getting your fingers
crushed! Do not touch these areas while the device is being moved.
• If a failure occurs which you cannot correct with the aid of the chapter
"What to do in the event of malfunctions"“, attach a sign to the system
stating it is out of order and contact the Carl Zeiss service staff.
• As the operator, have regular safety checks performed on this device to
prevent a reduction in the safety of the device as a result of aging, wear,
etc. See the chapter on "Care and maintenance" and the section on "Safe-
ty check".