Zeiss KSK 150 FC Instructions For Use Manual Download Page 49

Page: 49 / 92

Version 7.1
G-30-1158-en

Page 49

KSK 150 FC

Preparations for use

• Repeat the entire procedure for the second eyepiece.



Now, the colposcope is adjusted in such a way that the image is sharply
defined over the complete magnification range without any renewed fo-
cusing during the magnification setting.
If this is not the case, repeat the procedure.

Adjusting the eyecups

• Adjust the eyecups of the eyepieces in such a way that the entire field of

view can be seen.

– Viewing with eyeglasses: Rotate eyecups in.

– Viewing without eyeglasses: Rotate eyecups out.

Adjusting the working distance and magnification

• Position the colposcope before the area to be viewed so as to ensure con-

venient work.

• To achieve focusing, change the distance between colposcope and the

area to be viewed.

• Set the colposcope to maximum magnification and adjust the fine focus-

ing system until the image is sharply defined.

• Set the microscope to the required magnification. The focal plane is re-

tained in this process.

Summary of Contents for KSK 150 FC





























































































Search results

Summary of Contents for KSK 150 FC

Reviews:

Related manuals for KSK 150 FC

Brands by name

Popular brands

Zeiss KSK 150 FC, Instructions For Use Manual

Search results

Summary of Contents for KSK 150 FC

Reviews:

Related manuals for KSK 150 FC

Brands by name

Popular brands