Zeiss Humphrey II-i series, User Manual

Page: 364 / 580

Networking
Humphrey Field Analyzer II-
i
series User Manual 2660021145640 A
14-26
Manually Creating a Patient Folder with the Patient Folder Button
1
From the Patient Data 1 screen of a selected patient, select PATIENT FOLDER ( Figure 14.27 ).
Figure 14.27 Patient Data 1 Screen 2
A pop-up keyboard will appear to allow you to enter the name for that patient’s folder ( Figure
14.28 ). All future tests for this patient will be stored to this folder. Press ENTER to complete
your entry. You will be returned to the Patient Data 1 screen.
Figure 14.28 Entering the Name of a Patient Folder
Note: Patient folders created from the Patient Data 1 screen override automatic folder creation and
remain the specified folder for the patient unless changed later in the Patient Data 1 screen or via
the Specify Patient Folders function. Furthermore, if patient folders are created in the Patient Data 1
screen or with the Specify Patient Folders function, you will
not
be prompted for a patient folder
when the Prompt for Patient Folder setting is enabled (see “Using the Prompt for Patient Folder
Setting,” on page 14-29 ).