ELYRA 7
Left Tool Area and Hardware Control Tools
ZEISS
03/2019 V_02
000000-2262-999
155
Processing
functions do not contain additional options and the field remains empty. Only those
functions will be displayed that match the dimensions of the image parameters and that can be applied
to the loaded image.
Once an
Input image
is selected, the
Preview
panel becomes available at the bottom field. It shows the
Input image
(or
Input Image
and
Input Image 2
, which can be selected by pressing the respective
thumbnail) on the left and the
Preview
image on the right. In addition, a new View tab – the
Preview
tab – is opened for the image in the
Center Screen Area
The
Preview
tab shows the preview in more detail. The
Preview
thumbnail is always displayed in the
Processing
main tool tab, even when the view in the
Image Display
is changed. If in doubt which
Image is selected as processing input, always refer to the displayed thumbnails. Both Previews – in the
thumbnail as well as in the automatically generated Preview View tab in the Center Screen Area – are
immediately updated.
Fig. 251
Preview view tab in the Left Tool Area