background image

Installation of the AxioCam MRc5 

AxioCam MRc5 Instal Reference 

33 

1.5 Notes on Maintenance 

Camera Electronic 

Camera, interface and power supply are maintenance free. 

 

Optical System 

The internal optical components of the camera should always be protected. If 
no lens or TV adapter incorporating optics is screwed into the camera's C-
Mount thread, the camera's sensor and IR-filter must be protected by 
screwing the protective cap into the camera's C-Mount thread. 

 

Cleaning the Infra-red Barrier Filter 

Contamination of the infrared filter has an adverse effect on the quality of the 
resulting image (dark points, cloudy structures in the image). If there is dry 
dust on the front side of the infrared filter, you can remove it with a soft 
brush or with cotton (wool) after unscrewing the lens or TV adapter. 

 

Important Note on the Use of C-mount 

Objectives 

The camera can be mounted onto microscopes with standard TV-adapters 
with C-mount connections. Carl Zeiss supplies the camera complete with a 
pre-mounted infrared barrier filter, which offers the optical advantage for use 
on microscopes of a lower sensitivity to dust.  

The IR barrier filter is situated 5 mm behind the outer edge of the C-mount 
opening in the camera.  

 

Due to this pre-mounted IR barrier filter, C-mount objectives that 
screw more than 5 mm into the thread cannot be screwed into the 
camera.  

Summary of Contents for AxioCam MRc5

















































































Reviews: