Installation of the AxioCam MRc5
AxioCam MRc5 Instal Reference
3
General notes
Please ensure the notes described below are adhered to when setting up and
operating the AxioCam MRc5 camera.
All connectors must be firmly and securely attached.
Please protect the data cable from excessive heat (e.g. halogen lamps,
microscope fluorescence illumination).
Only use the camera in a clean and dry location.
The camera must be protected against mechanical impact. External
damage may affect the operation of inner components.
Keep chemicals and fluids away from the camera. To avoid the risk of fire,
do not use near inflammable liquids or gases.
Make sure there is sufficient ventilation of the camera head. Avoid direct
exposure to sunlight and locations near to heat sources (radiators, stoves).
Overheating can cause noisy images.
The camera housing can be cleaned using normal microscope cleaning
material.
If a repair is necessary send the camera including all cables with a detailed
description of the fault to:
Carl Zeiss
Service Mikroskopie
Abt. MS-LO2
Tel.: (++49) 551 5060 428
Königsallee 9-21
Fax: (++49) 551 5060 325
D-37081 Göttingen
eMail: [email protected]