Zeiss Auto Focus, Operating Manual

Page: 21 / 38

INSTALLATION
Auto Focus equipment Camera deflection Carl Zeiss
06/2013 425131-7044-001 21
3.2 Camera deflection
The left-side camera deflection is factory-fitted if
an Axio Imager 2 / Axio Imager Vario with Auto
Focus is ordered.
Both the manual camera deflection (425103-0000-
000) and the motorized camera deflection
(425104-0000-000) can be used.
If an Axio Imager 2 / Axio Imager Vario is
retrofitted with Auto Focus hardware, the camera
deflection and the Auto Focus installation set
(425131-9030-000) are fitted by a Carl Zeiss
customer service employee.
Use of the left-hand camera deflection as a camera connection is no longer possible if the Auto
Focus is used.
3.3 Auto Focus objectives
If the objectives used on the microscope stand have not been defined, they must be selected via ACR or
entered manually via the TFT display / MTB. This helps ensure that the magnification factor / reference
number is stored and that the focus position can be correctly calibrated via the TFT or the MTB for the
Auto Focus.
The objectives suitable for applications with the Auto Focus are listed in Table 1 on page 13.
The Auto Focus cannot be used with transmitted light objectives or objectives made by other
manufacturers. Only objectives from the specified list should be used in conjunction with the
Auto Focus.
3.4 Insert damping filter
For some Auto Focus applications it is also necessary to insert a BG 39 or BG 40, d = 23.5 mm IR
damping filter into the camera adapter. The damping filters are included with the Auto Focus.
If an IR damping filter is used later, the focus reference values will need to be recalibrated, see
section 4.8 on page 31.
In AxioVision (version 4.9.1 or later) also use the focus bar beneath the live image.
Fig. 8 Manual camera deflection (425103-
0000-000) for left side port