background image

Version 05/2015

Before using the products described in this manual be sure to read and understand all respective 
instruction.

The ARRI/ZEISS Master Anamorphic Lens Flare Sets are only available to commercial customers. The 
customer grants by utilization that the Master Anamorphic Lens Flare Sets or other components of the 
system are deployed for commercial use. Otherwise the customer has the obligation to contact ARRI/
ZEISS preceding the utilization. While ARRI/ZEISS endeavors to enhance the quality, reliability and safety 
of their products, customers agree and acknowledge that the possibility of defects thereof cannot be 
eliminated entirely. To minimize risk of damage to property or injury (including death) to persons arising 
from defects in the products, customers must incorporate sufficient safety measures in their work with 
the system and have to heed the stated canonic use.

ARRI/ZEISS or its subsidiaries do not assume any responsibility for incurred losses due to improper 
handling or configuration of the Master Anamorphic Lens Flare Sets or other system components.

ARRI/ZEISS assumes no responsibility for any errors that may appear in this document. The information is 
subject to change without notice.

For product specification changes since this manual was published, refer to the latest publications of  
ARRI/ZEISS data sheets or data books, etc., for the most up-to-date specifications. Not all products and/or 
types are available in every country. Please check with an ARRI/ZEISS sales representative for availability 
and additional information.

Neither ARRI/ZEISS nor its subsidiaries assume any liability for infringement of patents, copyrights or 
other intellectual property rights of third parties by or arising from the use of ARRI/ZEISS products or any 
other liability arising from the use of such products. No license, express, implied or otherwise, is granted 
under any patents, copyrights or other intellectual property right of ARRI/ZEISS or others.

ARRI/ZEISS or its subsidiaries expressly exclude any liability, warranty, demand or other obligation for any 
claim, representation, or cause, or action, or whatsoever, express or implied, whether in contract or tort, 
including negligence, or incorporated in terms and conditions, whether by statue, law or otherwise. In no 
event shall ARRI/ZEISS or its subsidiaries be liable for or have a remedy for recovery of any special, direct, 
indirect, incidental, or consequential damages, including, but not limited to lost profits, lost savings, lost 
revenues or economic loss of any kind or for any claim by third party, downtime, good-will, damage to or 
replacement of equipment or property, any cost or recovering of any material or goods associated with 
the assembly or use of our products, or any other damages or injury of the persons and so on or under 
any other legal theory.

In the case one or all of the foregoing clauses are not allowed by applicable law, the fullest extent 
permissible clauses by applicable law are validated.

Legal Disclaimer

Summary of Contents for Arri 135/T1.9









Reviews: