Version 05/2015
Master Anamorphic Lens
135/T1.9
Attention
1. During the assembly ensure that the environment is clean and free from
dust so that no dust particles can enter the lens.
2. To tighten and untighten the screws only use a T4 torque wrench with
a torque of 0.15Nm. If you use the lens in a rough environment please
secure the tightness of the screws afterwards with the T4 torque
wrench (same procedure as with the lug nuts on your car).
3. ZEISS uses locking varnish on the screws. As you remove the screws
from the lens we recommend to throw them away. Otherwise particles
of the dried locking varnish could soil the lens.
4. Only tighten or untighten the screws described in this manual. Otherwise
you will lose performance and warranty.
5. Smudges and fingerprints on the lens surface can be removed with the
ZEISS lens cleaning kit.
6. In case of further questions please contact an ARRI Service Station
(www.arri.de/service) or a ZEISS Cine Service Station
(+49 7364 20- 6175 or www.zeiss.com/cine)
