Version 05/2015
Flare Set User Manual
Intended use
The Master Anamorphic Lens Flare Sets are designed to be used on ARRI/ZEISS
Master Anamorphic lenses. Each Flare Set should only be used on the specified
focal length.
Safety tips
Caution
To ensure proper and safe use, we recommend that you read these safety
and operating instructions before using the product and then store them.
Non-observance can lead to injury or damage.
Safety and handling
Never point the flare elements or the lens directly towards the sun, because
you can significantly damage your eyesight. Store the flare elements into
their boxes when they are not in use. Otherwise they could start a fire!
Storage and transportation
Use the product only in temperatures ranging between -20°C and 40°C.
The product is not water resistant or waterproof, but it is equipped with dust
and weather seals to ensure weather protection when attached to the lens and
used in normal conditions. Protect the camera and lens appropriately when in
rainy or damp environments.
Should the product be exposed to moisture, dismount it from the camera.
Allow the device to dry completely before using it again. Do not attempt to dry
the product with the help of an external heat source, e.g. in a microwave oven
or using a hairdryer.
Delivery
1
Case
2
Front Flare Element
3
Rear Flare Element
4
Screws
5
User Manual
