STARTUP
Carl Zeiss
Connecting the control box
ApoTome.2
24
423667-7144-001
05/2012
3.3
Connecting the control box
1
USB
port
3
Connector for ApoTome.2 slider (
Slider
)
2
CAN
port (2x)
4
Mains connector
Fig. 3-1
Connectors on control box (rear panel)
•
Plug the connection cable ApoTome.2 to the power connector
Slider
3
) at the rear side of the
control box.
•
Connect the mains connector (3-1/
4
) of the control box to a power socket via the mains cable.
The control box can be connected in two different ways:
−
Via USB cable directly at the PC:
•
Use a USB cable to connect the USB port (3-1/
1
) on the rear panel of the control box with a free
USB port at the PC used.
−
Via CAN BUS cable to a free CAN BUS port on the microscope stand:
•
Use the CAN BUS cable (457411-9011-000) to connect one of the CAN ports (3-1/
2
) at the rear
panel of the control box with a free CAN BUS connector on the microscope stand used.
If an Axiovert 200 is used, the control box can only be connected to the PC via a USB cable. A
connection via CAN BUS is not possible!
Please refer to the Operating Manual AxioVision Rel. 4.8.2 / ZEN 2011 (blue edition) for more
detailed information about the configuration.
Summary of Contents for ApoTome.2
Page 1: ...Operating Manual ApoTome 2...
Page 34: ......