b) After shooting, pull out the knob (6 or 7) from the catch and set the zero
mark of the sub-ring (8) to the index point (9). Push knob (6 or 7) down
in the catch. The index is used to find the original location again for later
adjustments of the reticle (for other distances or other charges).
c) Do not forget: screw the cover (1 or 2) back on.
Note: On delivery of the Duralyt Series riflescope, the reticle is set at the
center of the adjustment range and the zero mark of the adjusting ring (8) is
set at the index mark (9). From this setting, adjustment upwards, downwards,
right and left is possible over half of the adjustment ranges given in the
following table.
The shot correction height for the riflescope with Bullet Drop Compensation
(BDC) is described in detail in the enclosed Bullet Drop Compensation user
instructions.
Duralyt riflescopes are designed so that when activating the reticle adjust-
ment, a corresponding movement of the reticle itself to the center of the
image cannot be detected.
The reticle always remains in the center of the image for all adjustments!
905200 Zeiss GBH 02_Duralyt Innen / S. 14 /
Pantone Reflex Blue
/
Schwarz
Instructions for use
14
22_GBH-Duralyt_INNEN_Pan.qxd 11.12.2009 17:04 Uhr Seite 1