background image

14-Function Foot Control Panel, Wired or Wireless  

Version 6.1

Page 2

G-30-1706-en

 

About This Manual

These Instructions for Use are part of the delivery scope.

Please read them carefully before use.

Store them at the place where the foot control panel is in use.

Keep them throughout the life cycle of the foot control panel.

Pass them on to the next owner or user of the foot control panel.

Help with orientation

At the beginning of these Instructions for Use there is a summary of the 
different sections; this provides an overview of all the the topics.

The contents of each chapter are specified in detail at the beginning of 
each section.

The index at the end of the manual will help you to search for specific 
terms.

Scope

These instructions for use apply to the foot control panel with the following 
identification label:

Type label numbers: 
304970-9100-000 / 304970-9200-000
304970-9300-000 / 304970-9400-000
304972-9100-000 / 304972-9200-000
304972-9300-000 / 304972-9400-000

Manufacturer's details

Subject to changes in design and scope of delivery, as well as ongoing 
technical development. 

Printed in Germany.

Copyright

©

 Carl Zeiss Meditec AG 2023

All rights reserved. Reprints and reproductions, in whole or in part, are 
prohibited. However, these Instructions for Use may be digitized and 
archived for internal use. Access to this data by third parties is not 
permissible and must be prevented.

Carl Zeiss Meditec AG
Goeschwitzer Strasse 51-52
07745 Jena
Germany

Email: [email protected]
Internet: www.zeiss.com/med
Instructions for use: www.zeiss.com/ifu

Summary of Contents for 304970-9100-000



















































































Reviews: