Zehnder Rittling Omnique OF100GIP Page 16 Installation Instructions Manual Download

Page: 16 / 20

• Pullcord turns fan on / off. Automatic switch off after 2 hours.

• Pullcord turns fan “run timer” on. Fan runs for 15 minutes and then automatically

turns off. Manual override by re-pulling the pullcord.

• Pullcord turns fan “run timer” on. Fan runs for 15 minutes and then automatically

turns off. Manual override by re-pulling the pullcord.

• HumidiSMART will automatically turn the fan on and then off when humidity is cleared.

Pullcord will not function when HumidiSMART is activated.

• Pullcord turns fan on / off. Automatic switch off after 2 hours.

• HumidiSMART will automatically turn the fan on and then off when humidity is cleared.

Pullcord will not function when HumidiSMART is activated.

• Pullcord turns fan on / off. Automatic switch off after 2 hours.

• Switch Live will turn the fan on / off. Pullcord will not function when fan is

activated via Switch Live.

• Pullcord turns fan “run timer” on. Fan runs for 15 minutes and then automatically

turns off. Manual override by re-pulling the pullcord.

• Switch Live will turn the fan on / off. Pullcord will not function when fan is

activated via Switch Live.

• TimerSMART will activate when Switch Live is turned off. Pullcord will not function

when TimerSMART is activated.

• Pullcord turns fan “run timer” on. Fan runs for 15 minutes and then automatically

turns off. Manual override by re-pulling the pullcord.

• Switch Live will turn the fan on / off. Pullcord will not function when fan is

activated via Switch Live.

• TimerSMART will activate when Switch Live is turned off. Pullcord will not function

when the smart timer is activated.

• HumidiSMART will automatically turn the fan on and then off when humidity is cleared.

Pullcord will not function when HumidiSMART is activated.

• Pullcord turns fan on / off. Automatic switch off after 2 hours.

• Switch Live will turn the fan on / off. Pullcord will not function when fan is

activated via Switch Live.

• HumidiSMART will automatically turn the fan on and then off when humidity is cleared.

Pullcord will not function when HumidiSMART is activated.

• Switch Live will turn the fan on / off.

• TimerSMART will activate when Switch Live is turned off.

• Switch Live will turn the fan on / off.

• TimerSMART will activate when Switch Live is turned off.

• HumidiSMART will automatically turn the fan on and then off when humidity is

cleared.

• Switch Live will turn the fan on / off.

• HumidiSMART will automatically turn the fan on and then off when humidity is

cleared.

4.0 How Your Fan Can Be Installed

•

Intermittent Mode

How It Works

iri

llc

itc

•

Summary of Contents for Omnique OF100GIP





















Search results

Summary of Contents for Omnique OF100GIP

Reviews:

Related manuals for Omnique OF100GIP

Brands by name

Popular brands

Zehnder Rittling Omnique OF100GIP, Installation Instructions Manual

Search results

Summary of Contents for Omnique OF100GIP

Reviews:

Related manuals for Omnique OF100GIP

Brands by name

Popular brands