9
2.4
Ceiling Mounting
8
Using the four fixing screws, secure fan
body to the wall. The electrical cable
passes through as appropriate. Wire fan
(See wiring details). Pullcord can be
removed if required.
7
For control panel access ensure a
minimum of 100mm free space is left
between side of product to any solid
structure.
Position grille assembly onto back plate
and secure with 4 fixing screws, ensuring
they are driven home.
11
Screw the protective wall grille over the
external duct opening.
9
10
To secure decorative insert, clip in
one side and then flex cover slightly to
engage opposing clips.
3
5
4
Remove grille assembly by unscrewing
the four screws located in the four side
openings. For Ceiling mounted
installation remove or cut off pullcord.
Cut an opening through the ceiling for
the fan and electrical cable.
The unit must be securely mounted using
all four fixing holes and fixing screws
provided. The screw fixings must be
completely driven home to ensure that
they do not interfere with the actuated
grille mechanism.
For control panel access ensure a
minimum of 100mm free space is left
between side of product to any solid
structure.
2
6
Place flexible or rigid ducting over the
spigot of the fan. Fit ducting to spigot
using appropriate method. Refer to
section 2.5.
X = 56 Ø = 105mm
Y = 78
Remove decorative insert by carefully
levering from top and bottom slots.
1
