General information
This installation instructions
literature is for Rittling Cabinet
Convectors. Rittling Cabinet
Convectors are hydronic terminal
units designed for high heating
capacity in open or hard-to-
reach areas. Your equipment
is initially protected under the
Zehnder Rittling standard 1-year
warranty provided the steps
outlined in this manual for initial
inspection, installation, periodic
maintenance and normal every
day operation of the equipment
are followed. This manual should
be thoroughly reviewed prior
to the installation, start-up or
maintenance of the equipment.
If any questions arise, please
contact your local Zehnder
Rittling sales representative or
the factory before proceeding
any further.
Upon delivery, examine the
shipment against the bill of
lading to make sure all of the
units have been received and
then check each unit carefully
for shipping damage. Any
damage should be reported to
the freight carrier and a claim
should be filed with them. Ensure
the shipping company makes
proper notation of any shortages
or damage on all copies of the
freight bill. Concealed damage
not discovered during unloading
must be reported to the shipping
company within 15 days of
receipt of the shipment.
All units are shipped F.O.B.
factory. Therefore, Zehnder
Rittling is not responsible for
damage during transit. It is the
responsibility of the installing
contractor to inspect and verify
that the units shipped were in
fact the correct model number,
voltage, etc. Any discrepancies
should be reported to the
local Sales Representative for
immediate resolution prior to
unpackaging and installation.
The factory should be notified
of any warranty repairs required
in writing before any corrective
action is taken. The factory
must be fully informed of the
expected costs before the work
Receiving
is begun. Zehnder Rittling is
not responsible for any repairs
or alterations made by the
purchaser without Zehnder
Rittling’s written consent and
will not accept any back charges
associated with these repairs
or alterations. The return of
damaged equipment will not
be accepted without written
authorization from Zehnder
Rittling.
A unit that has received a written
Return Goods Authorization will
be inspected by Zehnder Rittling
upon receipt. Any damage,
missing parts, reworking or
repackaging resulting from prior
installation will constitute just
cause for Zehnder Rittling to
issue partial credit.
9
General information