12 - EN
5 Installation
5.1 Rework Right to Left version
The unit version “Luxe” can be used as a Right-
hand version or Left-hand version. Just mount the
mounting bracket on the required side.
The unit with display is supplied as a Right-hand
version (the supply and return side are on the right
side of the unit). Follow the steps below when a Left-
hand version is wanted:
1
2
3
Remove the front panel by unscrewing
the 4 screws.
Release the back panel by unscrewing
the 4 screws.
Remove the display connector.
4
5
6
Remove the grommet including the
display cable.
Release the display by unscrewing the
2 screws.
Place the removed display on the back
side of the unit.
Remove the grommet on the back side
of the unit.
Place the removed grommet on the
front side of the unit.
7
8
9
Run the display cable to the rear of
the unit.
Make sure the display cable is
fixed between the holding pins
in the middle of the frame.
Slide the grommet on the display
cable to the correct position and place
the grommet into the opening.
Run the display cable between the
holding pins next to the display.
Connect the display connector again.
Place the removed display on the back
side of the unit.
Remove the grommet on the back side
of the unit.
