4 - EN
EN - 5
2. Use of the ComfoControl Ease
The overview below summarizes the information that will be displayed on the CC Ease.
Time and date
Actual ventilation setting
(with activated extractor
hood where fitted)
Automatic (AUTO)
or manual
ventilation (MANUAL)
Signal to replace internal
(I) or external (E) filter
Supply air or
exhaust air
ON or OFF
Comfort temperature or
temporary high setting,
analogue programme active
Geothermal heat
exchanger (EWT),
Post-heater and/or
bypass activated
The CC Ease panel has a number of buttons to operate the ComfoAir and to enter the
settings. These buttons are illustrated below.
This button switches to the highest ventilation setting.
- Press for less than 2 seconds
Extractor hood ON or OFF (optional).
- Press for longer than 2 seconds
Temporary high setting ON.
This button allows you to switch between supply/exhaust.
- Press once
SUPPLY OFF (and EXHAUST ON).
- Press twice
EXHAUST OFF (and SUPPLY ON).
- Press 3 times
SUPPLY and EXHAUST both ON.
This button allows you to display or set the comfort temperature.
- Press for less than 2 seconds
READ.
- Press for longer than 2 seconds
SET.
This button allows you to adjust two settings.
- Press for less than 2 seconds
Set ventilation programme (AUTO / MANUAL).
- Press for longer than 2 seconds
Set date and time.
These buttons allow you to adjust various settings:
- In P menu or comfort temperature screen
Set values.
- In main menu
enter ventilation setting (A, 1, 2, 3).
