10 - EN
EN - 11
5. Press
.
- Wait until the hours flash, e.g. “7”.
6. Select the required start time in
hours using
or
.
7. Press
.
- Wait until the minutes flash, e.g.
“00”.
8. Select the required start time in
minutes using
or
.
19. Press
- Wait until the ventilation setting
flashes, e.g. “3”.
10. Select the desired ventilation setting
using
or
.
The selected ventilation
profile stage will be deleted if
ventilation setting “d” is selected
here. Setting A can not be
programmed.
11. Press
to save the settings and
return to the main screen.
12. Programme the next ventilation
profile stage if required. Up to eight
ventilation profile stages can be
programmed.
- Simply repeat steps 1 to 11.
Selecting factory reset will
reload the default ventilation
programme.
2.8 Setting additional programmes via
P menus
Using some P menus in the ComfoAir, you
can:
■
Read the status of various ventilation
programmes;
■
Switch the time delay function on or off
for various ventilation programmes;
■
Programme a time delay for various
ventilation settings.
The user can only access P
menus: P1, P2 and P9 additional
programme settings. The
remaining P menus (P3 to P8) are
for use by the installer only.
