Zehnder Rittling ComfoAir Q, User Manual

Page: 13 / 36

12 - EN EN - 13
3.4.2 Maximum (BOOST) for a specific duration
It is possible to set a timer on the airflow
setting PRESET 3. This way you do not
need to change the airflow setting back
after a party, cooking or showering. You
just set the expected time you need airflow setting
PRESET 3.
1. Navigate to TASK MENUas instructed in the
chapter „How to navigate through the unit menu“.
2. Navigate to BOOST.
3. Navigate to TIMER.
4. Select the desired duration with the up and down
button.
5. Select CONFIRM.
Stop the boost before before the timer ends:
1. Repeat step 1 and 2.
2. Navigate to OFF.
3.4.3 Stop the airflow for a specific duration
When desired, the supply or extract fan of
the unit can temporary be turned off. Turning
the supply fan off may be desired to keep
out unpleasant odours from outside.
1. Navigate to TASK MENU as instructed in the
chapter „How to navigate through the unit menu“.
2. Navigate to VENTILATION.
3. Navigate to:
- SUPPLY ONLY if you would like to stop
extracting air;
- EXTRACT ONLY if you would like to stop
supplying air (if available);
4. Select the desired duration with the up and down
button.
5. Select CONFIRM.
6. Select CONFIRM.
Start the airflow before before the timer ends:
1. Repeat step 1 and 2.
2. Navigate to BALANCE.
Do not use this function to turn off
the ventilation during disasters.
Follow the instructions in the chapter
„Introduction and safety“ instead.
CONFIRM BACK
RESET ERROR
TASK MENU
STATUS
FILTERS
BASIC MENU
CONFIRM BACK
AUTO/MANUAL
BOOST
VENTILATION
AWAY
TASK MENU
2 1
CONFIRM BACK
TIMER
OFF
BOOST
CONFIRM BACK
40 MIN
BOOST DURATION
4
5 3
CONFIRM BACK
RESET ERROR
TASK MENU
STATUS
FILTERS
BASIC MENU
CONFIRM BACK
BOOST
VENTILATION
AWAY
TEMPERATURE PROFILE
TASK MENU
2 1
CONFIRM BACK
VENTILATION MODE
BALANCE
EXTRACT ONLY
SUPPLY ONLY
CONFIRM BACK
2 h
EXTRACT ONLY
4
5 3
CONFIRM BACK
EXTRACT ONLY
SUPPLY FAN WILL BE
TURNED OFF
6