49 En
Bear in mind that switching off the supply or
exhaust fan will temporarily immobilize your
balanced ventilation system.
2.3.7 Setting a personal ventilation
programme
The ComfoAir has a factory default ventilation setting
(setting 2).
If wanted, you can change the default ventilation set-
ting to suit your individual situation. For example a
weekday and weekend programm.
The ventilation volume can be changed/set as follows:
1.
Press
“
“ and “
“ for two seconds simulta-
neously.
-
Wait
until the ventilation programme appears.
2.
Programme
the desired day or series of days.
-
Select
the desired option using “
“ or “
“.
You can choose from:
– Weekend: “SaSu”;
– Working week: “MoTuWeThFr”;
– Week: “SaSuMoTuWeThFri”;
– Separate days: “Sa”, “Su”, “Mo”, “Tu”, “We”,
“Th” and “Fri”.
4.
Press
”
“.
- Wait until the programme position, e.g. “1”,
starts blinking.
5.
Select
the desired programme position using
“
“ or “
“.
6.
Press
“
“.
- Wait until the hour, e.g. “ 7 ”, starts blinking.
7.
Select
the desired start time in hours using
“
“ or “
“.
8.
Press
“
“.
– Wait until the minutes , e.g. “ 00 “, starts
blinking.
9.
Select
the desired start time in minutes using
“
“ or “
“.
10.
Press
“
“ .
–
Wait
until the ventilation setting e.g. “ 3 “,
starts blinking.
11.
Select
the desired ventilation level using “
“
or “
“.
When “d” is selected the selected pro-
gramme position will be deleted.
12. Press “
“ to save the settings and return to
the main screen.
13. Programme
the next ventilation programme if
required. Up to 8 program positions can be pro-
grammed.
- Repeat steps 1 to 12.
The default ventilation setting (setting 2) will
be loaded again if a General Reset is given.
2.3.8 Setting additional ventilation
programmes/ options in the P menus.
Some P menus in the CC Ease panel can be used
to:
• Read the status of various ventilation pro-
grammes;
• Set ventilationsettings for the extractor hood;
• Set time delays for various ventilation pro-
grammes.
The user can only access P menus P1, P2
and P9 to set additional programmes. The
remaining P menus (P3 to P8) are for use by
the installer only.
Accessing the P menus
1.
Press
“
” and “
“ for two seconds simulta-
neously.
-
Wait
until “P 2” appears on the display.
2.
Select
the desired P sub-menu using “
“ or “
“, e.g., P menu “
2
“.
