46
En
2.3 operating the CC Ease panel
The CC Ease panel is used for the following:
• Reading and setting the day and time;
• Reading and setting the comfort temperature;
• Reading and setting the ventilation volume;
• Switching Boost on;
• Switching the extractor hood on/off (optional);
• Switching the supply and exhaust fan on/off;
• Setting a personal ventilation programme;
• Setting additional ventilation programmes/ op-
tions in the P menus.
A concise explanation of the above listing is given in
the paragraphs below.
The CC ease will automatically return to the
main screen when no buttons are pressed for
30 seconds.
2.3.1 Setting the date and time
1.
Press
„
„ longer than 2 seconds.
-
Wait
until the day, e.g. “Sa”, starts blinking.
2.
Select
the correct day using „
„ or „
„.
3.
Press
„
„.
-
Wait
until the hour, e.g. “ 12 ”, starts blinking.
4.
Select
the correct hour using “
“ or “
“.
5. P
ress
“
“.
-
Wait
until the minutes, e.g. „
00
“,
start blinking.
Day and time
Actual ventilation setting
(Activated extractor hood )
Automatic or manual
ventilation
Signal to replace
internal (I) or
external (E) filter
Supply air and/or
exhaust air OPEN or
CLOSED
Geothermal heat exchanger
(EWT), afterheater [ ]and/
or bypass open [ ] or
closed.
Actual temperature,
selection or setting
The CC Ease panel has a number of buttons to operate the ComfoAir and to enter the settings. These buttons are illus-
trated below.
This button allows you to switch to the highest ventilation setting.
-
Press
for less than 2 seconds
¨
Extractor hood ON or OFF (optional)
.
-
Press
for longer than 2 seconds
¨
Boost setting ON
.
This button allows you to switch between supply/exhaust.
-
Press
once
¨
SUPPLY OFF (and EXHAUST ON).
-
Press
twice
¨
EXHAUST OFF (and SUPPLY ON).
-
Press
3 times
¨
SUPPLY and EXHAUST both ON.
With this button you can read or set the comfort temperature.
-
Press
for less than 2 seconds
¨
READ.
-
Press
for longer than 2 seconds
¨
SET.
This button allows you to programme two settings.
-
Press
for less than 2 seconds
¨
Programme ventilation setting (AUTO / MANUAL).
-
Press
longer than 2 seconds
¨
Programme date and time.
This button allows you to programme different settings:
- In P menu
¨
Set values.
- In main screen
¨
Enter ventilation setting (A, 1, 2, 3).
