6
3.1.2
3.1.3
Smart Humidity
To adjust the Smart Humidity Mode:
Factory set to ON
Options ON / OFF
3.1.4
Smart Timer
To adjust the Smart Timer Mode:
Factory set to ON
Options ON / OFF
Function
Description
Smart Timer monitors the length of time that there has been an
occupancy presence detected within a “wet” room (via the Switch
Live) and provides a fixed over-run time period to best match the
length of time that the Switch Live is active.
(See 3.1.4 for adjust
function setting On/Off ).
Smart Humidity monitors the ambient humidity within the “wet”
room environment and looks for short peaks of humidity made by
either showering or bathing. This smart technology ensures that
your ComfoAir 155 WMe is not on boost for prolonged periods of
time.
(See 3.1.3 for adjust function setting On/Off ).
Smart Timer
Smart Summer Bypass monitors the internal and external
temperature and automatically identifies when the filtered
summer bypass needs to be activated, protecting your home
from overheating.
(See 3.1.5 for adjust function setting
Auto/Manual/Off).
Frost protection monitors the internal and external temperature
and automatically identifies when the frost protection needs to be
activated, protecting your unit from freezing.
Smart Humidity
Smart Summer Bypass
Frost Protection
T I M E R S M A R T
< O N
>
H U M I D I S M A R T
< O F F >
• Press control button to activate panel
• Scroll to “User Menu” option and press button to enter
• Scroll to “TimerSmart” option and press button
• The current setting status will flash
• Rotate button to desired outcome
• Press to confirm
• Screen will time out after 30 seconds
• Press control button to activate panel
• Scroll to “User Menu” option and press button to enter
• Scroll to “HumidiSmart” option and press button
• The current setting status will flash
• Rotate button to desired outcome
• Press to confirm
• Screen will time out after 30 seconds
Note:
You can adjust the sensitivity of your unit when Smart
Humidity is ON. To adjust:
• Follow the steps above to 'HumidiSMART' option and select 'ON'
• Scroll right to the 'Sensitivity' option and press button
• The current setting status will flash
• Rotate button to desired outcome:
Mode 1 for standard setting (default)
Mode 2 for increased sensitivity
• Press to confirm
• Screen will time out after 30 seconds
