ZVconnect User Guide
Synchronization to specific Receiver
In cases where there are multiple Receiver units in range, you will want to
Synchronize or Pair a Transmitter to a specific Receiver. This is done by putting
the Receiver into Pairing Mode and synchronizing it with desired Transmitters.
Step 1:
Connect the Receiver to the display’s HDMI input and then connect power
adapter (5V2A) to the USB-C port of the receiver.
Step 2:
LED of the Receiver center button will turn
blue
for a few seconds and flash for
about 30 seconds. The “Ready to play” message will appear in the bottom left
corner of the display.
Rev 20201105
Page of
9
27