ZVconnect User Guide
Step 5:
Once pairing is completed, press the Receiver’s center button until you see the
“initialization” in the status field to exit pairing mode.
Important:
You will not be able to transmit video from a Transmitter to Receiver
until the Receiver is taken out of pairing mode.
Transmitter Factory Reset:
To factory reset the transmitter: Starting with transmitter powered off, hold the
center button in first, now hold the power button in and hold both buttons in for
about 15 seconds. Once LED flashes Purple the unit has been factory reset.
Unit will now auto synchronize to any RX currently in range. If there is no RX unit
in range, the transmitter LED will continue to flash purple. To exit Reset Mode,
follow the instructions for Synchronizing to a specific receiver starting on page 11
of this document. Perform step #4 from the flashing purple LED status. Hold
the setting button until it flashes blue. Be sure to perform step #5 to take the
Receiver out of Pairing mode
Rev 20201105
Page
of
12
27
