owner`s manual Vision 1.2
owner`s manual STAC Vision 1.2 © Zeck Audio
8
2.
Always pre-check the store tank for sufficient filling with original
STAC
®
Fog Fluid
. Never
attempt to operate the
S T A C
®
Vision 1.2
without or with any other than original
STAC
®
Fog Fluid
. Our 2 year warranty does not cover any damage that occurs from disre-
garding these particular instructions.
3.
Don’t place the unit in a position that is too high above the stage. In contrast to fog from
dry ice, the fog created by the
STAC
®
Vision 1.2
does not ‘stick’ to the ground but has a
slight upward tendency. Take care for a free path for the fog, don’t place any objects in
front of the fog outlet. By making inventive use of coloured lamps and strobe lights (e.g.
STAC
®
CL 10
light unit) or ventilators, the dramatic effect of the fog can be even more in-
creased. Feel free to experiment to make full use of the 7 metres fog range of the
STAC
®
Vision 1.2
.
4.
Connect the unit to the mains supply with the supplied mains cord. The included pushbut-
ton is connected to the ‘Remote Control’ jack on the rear of the unit with the supplied 8 m
cable. After turning the
STAC
®
Vision 1.2
on, give the unit 6 minutes for an initial heatup.
After this period, the
STAC
®
Vision 1.2
is ready for operation.
