zebris Medical GmbH
Canid Gait Technical Specifications and User Manual
Page 26/33
For the commissioning of the Canid Gait system for the stance and gait analysis, the asso-
ciated power supply, a USB cable type A-B as well as the installation CD with the Animal
Analysis Suite application software are necessary. All components are included in the scope
of delivery of the Canid Gait measuring system.
All cable connections of the Canid Gait sensor are integrated in the interface box, which is
positioned on the underside of the treadmill frame.
6.2
Connection of the measuring system to mains supply
6.2.1 Power supply of the Canid Gait Sensors
NOTE
The FDM-T CanidGait treadmill system with the Dog-Tread Pro
Large treadmill has an integrated power supply, which is powered by
the treadmill power supply.
For connecting the Canid Gait sensor to the power supply, connect the power supply unit to
the mains socket and the power socket on the interface box.
WARNING
For operating the Canid Gait sensor, exclusively use the power
adapter approved by zebris, which is suitable for the power supply of
all Canid Gait systems.
REF.-No.
33102024 / Mascot type 2420
Input
Output
Cable
Length
100 - 240 V AC
16 V DC
Mains lead
1.7 m
50 - 60 Hz
60 W
DC lead
5 m
Pin arrangement / polarity
„
-
“ Contact:
outer contact
of hollow plug
„
+
“ Contact:
inner contact
off hollow plug
