Wireless Data Collector
9
U
SER
’
S
M
ANUAL
Connecting to PC
To use the software supplied with the data collector, it must be connected to a PC. To
connect wirelessly, please see the Wireless Operation section.
Connecting via Cradle
To connect the data collector to a PC via cradle:
1.
Place the data collector on the cradle and connect the cradle to PC using the USB
cable.
2.
The PC should auto-detect the device as a COM device and ask for the driver when
connecting the first time.
3.
Please download and install the driver from ZEBEX website. The system should
assign a COM port to the device after the driver installation.
Connect the power adapter to the cradle when necessary.
Make sure the unit is turned on after the cable is connected.
Check the COM and LPT section in the device manager for the assigned COM
port. The data collector should appear as a virtual com device.
Running the Device on PC
1.
Install and run ZAC on your PC.
2.
Make sure the virtual COM port driver is installed.
3.
Run any connection program on ZAC. For more details please see the ZAC User’s
Manual.
4.
Check the device manager on your PC for the COM port and set the same value
in ZAC Setting to connect the device.
Summary of Contents for Z-900 BT Series
Page 8: ......
