Dual-Laser Omnidirectional In-Counter Scanner
27
U
SER
’
S
M
ANUAL
ner from POS System
trolling
Controlling the Scan
The scanner can be controlled from the POS system via the RS-232C interface. Con
can be accomplished by transmitting the following single byte commands to the scanner.
The default settings of the commands are as follows:
ASCII Code
Function
Byte is Also Called:
0E Hex
enable (resumes disable)
Shift Out or <Ctrl-N>
0F Hex
disable
Shift In or <Ctrl-O>
05 Hex
power-up re-initialization
ENQ or <Ctrl-E>
12 Hex
sleep
DC2 <Ctrl-R>
14 Hex
wake up (resumes sleep)
DC4 <Ctrl-T>
When the scanner is disabled (unable to scan), the motor of the scanner
will stay on until the scanner goes into sleep mode.
