Dual-Laser Omnidirectional In-Counter Scanner
20
U
SER
’
S
M
ANUAL
EAN-13 identifier code
F
EAN-8 identifier code
FF
Codabar identifier code
N
Code 128 identifier code
K
Code 93 identifier code
L
MSI identifier code
P
GS1 CodeBar Omnidirectional identifier code
RS
GS1 CodeBar Limited identifier code
RL
GS1 CodeBar Expanded
RX
Industrial 2 of 5 identifier code
D
Code 11 identifier code
O
Standard 2 of 5 identifier code
S
Matrix 2 of 5 identifier code
G
Instal
ion
lat
of an Auxiliary Scanner
Before installation,
r to make sure the device and firmware
versio
upp
a function. Once you’re sure about it, follow the steps below to use
the auxiliary port as a handheld scanner input port:
1.
nfig
the handheld scanner data format as above table requirements.
2.
rn o
e host system.
3.
nne
xiliary port using auxiliary cable.
4.
ne
ly for the auxiliary scanner (if required).
5. Use the programming barcodes to activate the auxiliary port of the in-counter
ission mode. (Refer to its separate Programming
Guide.)
EAS Connection
contact your distributo
n s
ort such
Co
ure
Tu
ff th
Co
ct the handheld scanner to the au
ct the external power supp
Con
scanner and set up its data transm
The sc
ted EAS deactivation antenna requires an E
ble.
1.
wer of the EAS system is off.
2.
iate connectors on the scanner and the EAS system.
3.
unter Scanner with the
cessary barcodes on
anner’s integra
AS host ca
Make sure that the po
Plug the cable to the appropr
Program the Omnidirectional In-Co
ne
the next page.