Zebex Z-3191BT, User Manual

Page: 5 / 98

Wireless Handheld Gun Type Scanner iv
U
SER
’
S
M
ANUAL
Laser Light Viewing : The scan window is the only aperture through which laser light may
be observed from this product. A failure of the scanner engine, while the laser diode
continues to emit a laser beam, may cause emission levels to exceed those for safe
operation. The scanner has safeguards to prevent this occurrence. If, however, a
stationary laser beam is emitted, the failing scanner should be disconnected from its
power source immediately.
Adjustments : Do not attempt any adjustments or alteration of this product. Do not
remove the protective housing of the scanner. There are no user-serviceable parts inside.
Optical : The use of optical instruments with this product will increase the eye hazard.
Optical instruments include binoculars, magnifying glasses, and microscopes but do not
include normal eye glasses worn by the user.
CAUTION : Use of controls or adjustments or performance of procedures other than those
specified herein may result in hazardous radiation exposure.
For CE-Countries
This scanner is in conformity with CE standards. Please note that an approved, CE-marked
power supply unit should be used in order to maintain CE conformance.
Power Supply
z
Use only the type of battery and the charging equipments that came with your
scanner.
z
Using any other type of battery and charging equipment may damage the scanner
and invalidate the warranty.
z
Do not short the battery terminals. The battery could overheat.
z
Do not attempt to split or peel the outer casing.
z
Remove the battery if the scanner is not going to be used for a long time. If the
battery is left unused for more than 3 months, you need to charge the battery
before use.