Zebex Z-3191BT, User Manual

Page: 34 / 98

U
SER
’
S
M
ANUAL
Wireless Handheld Gun Type Scanner 25
Start Of Configuration
Cradle Host Mode
The scanner communicates with the host through the cradle. Typically, scanner and
cradle in the same delivery box are paired and corresponded to host interface in factory.
To check if the scanner is paired to the cradle, check the scanner LED group1 for slow
blue flash and check the top cradle LED for steady blue light. If LED group1 of scanner and
top LED of cradle are both flashing blue, follow the steps below to radio connect the
scanner and cradle.
Cradle Host Pairing
1. See Connecting the Cradle to connect the cradle and the computer. Please
make sure the cradle LED is flashing blue indicating it’s not linked to any
scanner. If the LED shows steady blue, the cradle is already paired to another
scanner so you must unpair the scanner before continuing.
2. Power on the scanner and enable cradle host mode if necessary.
Cradle Host mode enable
Enable cradle mode with this set.
3. Use the scanner to scan the pairing barcode at the bottom of the cradle to
begin pairing. 3 short beeps will be heard.
4. The LED indicator on the scanner will flash blue rapidly indicating search
mode in process. The LED on the cradle becomes steady blue when the
pairing is successful.
5. Scan the corresponding host interface the cradle is using to begin using the
scanner.
Return to USB default
ʳ
Return to cradle USB communication.
ʳ
(Communication cradle link required)
Return to wand
emulation default
Return to cradle wand emulation.
(Communication cradle link required)
Return to RS232 default
Return to RS232 cradle communication.
(Communication cradle link required)
IBM PC/AT/PS/2 Keyboard
emulation
Cradle IBM PC/AT/PS/2 Keyboard emulation.
(Communication cradle link required)
End Of Configuration