U
SER
’
S
M
ANUAL
Wireless Handheld Gun Type Scanner
33
Start Of Configuration
Batch Transfer
Use the settings in this section to setup batch transfer.
Send Batch Data By
Scanning Label
Scanning this label automatically exits you from the
Programming Mode. Press and hold the trigger for over
1 second to send the data.
Send Batch Data on line
USB cable contact
Data is ready to be transferred upon USB connection.
Press and hold the trigger for over 1 second to send
the data.
Send Batch data on cradle
Data is ready to be transferred upon placement on the
cradle. Press and hold the trigger for over 1 second to
send the data.(Cradle radio connected is required)
Batch Mode Sounds Settings
Use the settings in this section to setup the sound.
Out of range resend data
with beeper sound
Add beeper sound when resending data in Out of range
mode.
Out of range resend data
without beeper sound in
Out of range mode.
No beeper sound when resending data
Send Batch Data without
beep
No beep when sending data. Good-read LED will light
up until the transfer is done.
Send Batch Data with Beep
Beep sound when sending data. Good-read LED will
light up until the transfer is done.
End Of Configuration
Summary of Contents for Z-3191BT
Page 1: ...Advanced Handheld High Speed Laser Scanner 1...
Page 9: ......
