Z-3130BT
11
Start of Configuration
End of Configuration
【
Handshaking Protocol
】
None handshaking with CR
None handshaking with CR/LF
None handshaking with
STX/ETX
ACK/NAK with CR
ACK/NAK with CR/LF
ACK/NAK with STX/ETX
☆
Z-3130BT
12
4.4 The Symbologies Setting
4.4.1 JAN/EAN/UPC Parameter Setting
Start of Configuration
End of Configuration
【
Decode
】
Disable
Enable
☆
【
UPC-A Format
】
Force UPC-A to EAN-13
Disable
Force UPC-A to EAN-13
Enable
☆
【
UPC-E Format
】
Force UPC-E to EAN-8 Disable
☆
Force UPC-E to EAN-8 Enable
Force UPC-E to UPC-A Enable
【
JAN add-on
】
JAN+add-on Disable
☆
Only JAN+add-on Enable
JAN and JAN+add-on Enable *
* There is possibility that scanner will output only JAN code without add-on
code when it was set on this setting.
