Zebex Z-3130BT, User Manual, Page: 4 / 11

Z-3130BT
7
３
.Communication protocol
3.1 Serial Communication protocol
Baud Rate
：
115200bps
Data Bit
：
8
Start Bit
：
1
Stop Bit
：
1
Parity
：
Even
Flow Control
：
XON/XOFF
Handshaking Protocol
：
ACK/NAK (Default)
3.2 Output data format
Transmission
：
ASCII
（
JIS8
）
Message Terminator
：
STX/ETX (Default)
* You can change handshaking protocol and message terminator.
Please refer P11.
Z-3130BT
8
4.Parameter Setting
Please note that the setting change cannot be done while not
connecting this scanner with PC or cellular phone. (state that can be
read)
4.1 Setting method
4.2 Initialization
Start of Configuration
Reset(return to
☆
)
End of Configuration
Scan “Start of
Configuration”Label
Scan Parameter
Barcode
Scan “End of
Configuration”Label
Beeper once
GoodReadLED Blinking
Beeper once
GoodReadLED Turning off
Beeper once
SOC
Reset EOC
Return to Factory default