manualshive.com logo in svg

Zebex Z-3052, User Manual

Share
Download
Zebex Z-3052 User Manual Download Page 95

88 

Decode UPC/EAN/JAN Supplemental   

Supplemental are bar codes appended according to specific format 
conventions (e.g., UPC A+2, UPC E+2, EAN 13+2). Six options are available.   

y

 

If Decode UPC/EAN/JAN Only with Supplemental is selected, 
UPC/EAN/JAN symbols without supplemental are not decoded.   

y

 

If Ignore Supplemental is selected, and the decoder is presented 
with a UPC/EAN/JAN with a supplemental, the UPC/EAN/JAN is 
decoded and the supplemental bar code is ignored.   

y

 

An Auto discriminate Option is also available. If this option is 
selected, choose an appropriate 

UPC/EAN/JAN 

Supplemental Redundancy 

value from the next page. A value of 5 

or more is recommended. 

y

 

Enable 378/379 Supplemental Mode to delay only EAN-13/JAN-13 
bar codes starting with a ‘378’ or ‘379’ prefix by the supplemental 
search process. All other UPC/EAN/JAN bar codes are exempt 
from the search and are reported instantly upon decodes.   

y

 

Select Enable 978 Supplemental Mode to delay only 
EAN-13/JAN-13 bar codes starting with a ‘978’ prefix by the 
supplemental search process. All other UPC/EAN/JAN bar codes 
are exempt from the search and are reported instantly upon 
decodes.  

y

 

Select Enable Smart Supplemental Mode to delay only 
EAN-13/JAN-13 bar codes starting with a ‘378’, ‘379’, or ‘978’ prefix 
by the supplemental search process. All other UPC/EAN/JAN bar 
codes are exempt from the search and are reported instantly upon 
decodes.  

 
Note: To minimize the risk of invalid data transmission, select either to decode 
or ignore supplemental characters.   

 

 

Decode UPC/EAN/JAN Only 

With Supplemental 

 

 

 

 

Ignore Supplemental   

 

Summary of Contents for Z-3052

































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands