150
Prefix/Suffix Values
A prefix and/or one or two suffixes can be appended to scan data for use in
data editing. To set a value for a prefix or suffix, scan a prefix or suffix bar code
below, then scan a four-digit number (i.e., four barcodes from
Appendix D,
Numeric Bar Codes
) that corresponds to that value. To correct an error or
change a selection, scan
Cancel barcode
.
Note: To use Prefix/Suffix values, first set the
Scan Data Transmission Format
.
For non-SSI hosts, when using host commands to set the prefix or suffix, set
the key category parameter to 1, then set the 3-digit decimal value.
Scan Prefix
Scan Suffix 1
Scan Suffix 2
Summary of Contents for Z-3052
