10
Legend Plus & Expert Plus edition
2
Assembly
For construction possibilities of the Legend Plus Edition (STANDARD gutter) with standard length beams see Appendix 1.
For construction possibilities of the Expert Plus Edition (GIGA gutter) with standard length beams see Appendix 2.
1
Determine the desired roof pitch between 5° and 15°.
The standard roof pitch is 8 degrees (141 mm fall per meter)
2
3
Determine and mark the mounting location of the wall profile.
Calculate the height using the calculation tables in Appendix 1
and 2 on pages 28 to 31 in this manual.
Mount the wall profile level on the wall. If necessary, place
standard compriband (210 cm, not supplied) behind the wall
profile to fill in any unevenness.
4
Seal the top of the wall profile with sealant.
5°
8°
15°
Y
X
1 m
2 m
3 m
4 m
56 cm
42 cm
28 cm
14 cm
